MY 🖤 FF PRO-L2 SETTINGS
HTML-код
- Опубликовано: 8 сен 2024
- 🎛 These are my FabFilter Pro-L2 settings so you can get your tracks as loud as mine!
👉🏼 Make sure you have the attack on slow, and the release on fast
🙅🏻♂️ This way, I'm hardly attacking the sound...
👍🏼 It's going through as a brick wall limiter
🗞️ For Weekly Mixing & Mastering Tips…
Join my Audio Anoraks Newsletter!⚡️
🔗 Streaky.com/aa
(Link in bio)
#mastering #fabfilter #limiter #masteringtips #tipsandtricks #shorts
For anyone confused, the Pro-L 2 doesn’t work like an average compressor: there are two processing stages. The Attack knob does not affect the initial transient phase like you may expect; that’s controlled by the Lookahead knob. The Attack and Release knobs affect the onset of the ‘release’ stage of the limiter. As a result, a fast Lookahead, slow Attack, and Fast release will lead to louder masters at the risk of additional distortion. Good tip 👍🏻
you can feel the loudness and punch even with phone speakers thats fire 🔥
I’m sure I’ve seen three different videos on the same subject from Streaky all with different settings 😂
However the slow attack definitely sounds louder when I’ve tested it too
I just got more into mixing, and dude, you have been saving my life these past few months. Thank you so much!
My guy!! Why are you the GOAT!!!!🔥🔥🔥
Thank you big guy we appreciate you so much ❤😊
I always thought brick wall limiters had fast attack, so the sound hits the brick wall quickly? I never knew the attack was supposed to be slow. Perhaps you could dive deeper into the explanation?
it isnt. Pro Tip - the ATTACK refers to when the release STARTS,,,,,the slower it is the longer the limiter limits. SO its teh opposite.
Thats a huge difference. Wow
Better groove too
That’s not what the attack function does…
But you’re right it does make it loader with a slow attack
Awesome ❤️
Nice!
Isn’t that basically turning it into a sort of clipper? Albeit, probably a soft clipper. I do this trick all the time with Smart:Limit from Sonible, so I know it works!
Ty 🛫🛫🛫
It is basically that but proL has something else going on in its algorythms that Will Give you a nicer sound than if you just used a soft clipper, I personally use a soft clipper and then a limiter after
Streaky can you do a video on when you choose to use the Pro L2 vs the OZ Maximizer?
Boz clipper is the best for me
Streaky, Hello! In one of the videos you showed that you always turn off "true peak limiting" knob but in this video it's turned on. Did u just forget about turning it off or you changed your mind?
I put the same settings as you, but can you explain me why the track sounds with too much highs? Like I pushed it with EQ 😂
Pushing a brickwall limiter or clipper inevitably causes distortion. That may be what you’re hearing. It’s not always pleasant, but it can be right.
Also, slow attack effectively makes transients faster and sharper, which for some reason our brains equate with “brightness” similar to how we perceive boosted highs.
Nice edit with the meme Streaky
🐐
Is it truly better or does the gangster ripping up the floor trick my brain.
😂😂😂
what about ozones maximizer? character set to slow? thanks
Channel unlinking not always good, I don’t want artefacts on Sides after limiter..
THIS SETTTINGS ARE GOOD ALSO ON MASHUPS ALREADY LIMITED BEFORE ??
I noticed something if you bring the release back 4 pm on the release knob .can you tell I want you feel 🤔
Right side Release knob or left side Release one?Thank YOU.
Right side
@@Jabesh_Dta_Music Thank YOU for replying my question! :) The knob is the CHANNEL LINKING area, isnt it? Thank YOU so much.
Stop giving away all my secrets 😂😂 took me years to figure this stuff out on my own lol
Sounds better without the limiter
Lmao no
the loudness war is useless..
This edit 😂😂😂😂